Graphical User Interface
65
Reverse bytes order
Blank check before
program
Verify after program
Verify after read
Auto-Detect presence of
device in the socket
On Device Auto-Detect or
'Start' Button:
If this box is checked the will sweep the byte order in the 16-bit
word while it executes the Read , Program and Verify operations.
This option does not affect the data in the ChipProg buffers, as
they remain the same after the file loading.
If this box is checked the ChipProgUSB will always check if the
target device is blank before programming it.
If this box is checked the ChipProgUSB will always verify the device
content right after it was programmed.
If this box is checked the ChipProgUSB will always verify the device
content right after it was read out.
If this box is checked the ChipProgUSB will test whether each of
the device leads is reliably squeezed by the programming socket
contact. If so a preset programming function (operation) or Auto
Programming will start. Otherwise, if some contact is bad a current
operation will be blocked.
The group of radio buttons. The checked radio button defines what
the ChipProg 'Start' button.
4.4.1.2.1 Split data
The group of radio buttons in the Option tab in the Split data field allows programming 8-bit memory
devices to be used in the microprocessor systems with the 16- and 32-bit address and data buses. To
do so the buffer content should be properly prepared to split one memory file iinto several smaller files.
The data splitting enable the conversion of the data read from 16- or 32-bit devices to make file images
for writing them to memory devices with the byte organization.
Radio button
No split
Even byte
Odd byte
Description
This is a default option. A whole buffer is not split and is considered
as a whole one byte data array.
The data in the buffer are considered as an array of 16-bit words.
The buffer-device operations are conducted with even bytes only .
For example, if the programmer reads the device from the
address=0, the byte with this address will be placed to the buffer
location also with the address=0, the byte from the device with the
address=1 will be placed to the buffer location with the address=2,
etc.
The data in the buffer are considered as an array of 16-bit words.
The buffer-device operations are conducted with odd bytes only .
For example, if the programmer reads the device from the
? 2010 Phyton, Inc. Microsystems and Development Tools
相关PDF资料
CHUSBWB-2 BATT CHARGER AA/AAA W/2AAA CELLS
CK-S6-SP623-G BOARD DEV S6 WITH TX
CK-V6-ML628-G KIT VIRTEX-6 CHAR ML628
CLSD004 LED DRIVER PROGRAMMER W/CABLE
CMC484812 RACK STEEL 12X48X48 GRY
CMCQP3 PANEL INNER 25.59X15" GREY
CML12C32SLK KIT STUDENT LEARNING 16BIT HCS12
CMR-8040 RACK CABLE MANAGMNT OPEN ASSMBLY
相关代理商/技术参数
CHIPPROG-G41 功能描述:PROGRAMMER GANG 4 SOCKET RoHS:是 类别:编程器,开发系统 >> 独立编程器 系列:- 产品目录绘图:CHIPPROG-G4 标准包装:1 系列:- 类型:成组编程器 适用于相关产品:EEPROM,EPROM,FLASH,MCU,NVRAM,PLD 所含物品:编程器,线缆,CD 产品目录页面:598 (CN2011-ZH PDF) 相关产品:AE-TS56-16I-3-ND - ISP CABLEADAPTER 14-PIN HEADERAE-TS40N-ND - ADAPTER SOCKET 40-TSOP TO 40-DIPAE-TS32N-ND - ADAPTER SOCKET 32-TSOP TO 32-DIPAE-TS28-ND - ADAPTER SOCKET 28-TSOP TO 28-DIPAE-T44-P16-ND - ADAPTER SOCKET 44-QFP TO 40-DIPAE-T44-I51/505-ND - ADAPTER SOCKET 44-QFP TO 40-DIPAE-SS56-16I-ND - ADAPTER SOCKET 56-SSOP TO 40-DIPAE-SP8U-ND - ADAPTER SOCKET 8-SSOP TO 8-DIPAE-SP28U2-ND - ADAPTER SOCKET 28-SSOP TO 28-DIPAE-SP28U1-ND - ADAPTER SOCKET 28-SSOP TO 28-DIP更多...
CHIPPROG-ISP 功能描述:PROGRAMMER IN-SYSTEM UNIVERSAL RoHS:是 类别:编程器,开发系统 >> 内电路编程器、仿真器以及调试器 系列:- 产品变化通告:Development Systems Discontinuation 19/Jul/2010 标准包装:1 系列:* 类型:* 适用于相关产品:* 所含物品:*
CHIPS CAPACITOR 0.015UF 50V CERAMIC 制造商:AVX Corporation 功能描述:CHIPS CAPACITOR 0.015UF50VCERAMIC*NIC*
CHIPS-IN-DIPS 制造商:未知厂家 制造商全称:未知厂家 功能描述:ASIC
CHIPT1593CSE6327X1SA1 制造商:Infineon Technologies AG 功能描述:RF SILICON MMIC - Gel-pak, waffle pack, wafer, diced wafer on film
CHIPV6 制造商:JDSU 制造商全称:JDS Uniphase Corporation 功能描述:The industrya??s most compact 100 G test solution
CHIS-24 制造商:Mencom 功能描述: